Before & After Photos

Click on a photo to enlarge.

Basement Waterproofing Saluda, VA

This Saluda basement had major water issues in the basement. The WaterGuard Drainage System and SuperSump were installed to help keep this basement dry ALL the time. 

Installing CleanSpace in a Midlothian, VA Basement

As part of a basement waterproofing solution, we install a CleanSpace vapor barrier on the basement walls. The liner is sealed at all seams and mechanically attached to the walls. It directs the water that seeps through the foundation walls down into the WaterGuard drainage track and ultimately to the sump pump and away from the home's foundation. 

WaterGuard in a Midlothian, VA Basement

Water has been seeping into this basement through the porous block wall and damaging the fished wall and trim that had been installed on top of it. The sheetrock and trim have been cut away to expose the block wall where we can see water staining and efflorescence, clear signs of prolonged water infiltration. 

 

We installed WaterGuard, a perimeter french drain system that collects the infiltrating water and directs it to a sump pump where it is pumped away from the home's foundation. CleanSpace Vapor Barrier is installed on the foundation walls, about 6 inches above outside grade to direct the moisture coming through the walls down into the drainage system. This also allows the homeowners to refinish the basement without concerns of water damaging the walls again. 

Upgrading a Basement Sump Pump

This homeowner needed a new sump pump installed as part of a basement waterproofing system. Their old one was an open pit, that allowed odors and moisture to rise into the basement and be pulled up into the living space. 

 

Their new pump is a large basin that houses a 1/3hp pump covered with an air-tight lid. The system has a float on top allowing for water to enter if a leak occurs from above, and the basin is large enough that if the homeowner later feels a need to add a pump or battery backup system, they can do so without having to re-dig the hole or replace the basin. A clean pump stand keeps the sump out of any grime, grit, and sediment that may collect in the bottom of the basin to prevent clogs.

Managing Water in a Basement

Water has been seeping through the porous block walls in the basement of this home. It has left behind bubbling paint and staining on the walls as well as a musty, damp environment. To control the water seeping into the basement, we've worked with the homeowner and determined a Waterproofing system with CleanSpace and DryTrak is the best solution. 

 

As part of the Waterproofing System, CleanSpace is attached to the basement walls. The heavy-duty vapor barrier will direct water that works its way through the cinderblock wall down into the drainage track and ultimately to the sump pump and away from the home. Clean Space is a great option because it's heavy-duty and allows the homeowner to frame and finish their basement over the system making the space useable, and adding valuable square footage to their home without the worry of damage to their property. 

Find A Contractor
Free Estimate
Top