Before & After Photos

Click on a photo to enlarge.

Insulating a Rim Joist in East Windsor, CT

This homeowner in East Windsor, CT reached out to us looking to insulate his home. He had fiberglass insulation in his basement that he wanted replaced. In a basement, the “rim joist” is the perimeter of the floor framing system along the exterior of the house. The joints and gaps between all the framing members allow for a lot of air leakage into the house. The rim joist is seldom insulated and never air sealed. Basement ceiling insulation, especially fiberglass batts, doesn’t stop the flow of cold air into the home. Results - cold floors, drafty, uncomfortable rooms, cold basement/lower level, higher heating and cooling bills and more condensation in the basement or crawl space in the summer.

 

We had the perfect solution for this customer. In this solution, we spray foam the rim joist in the basement in order to seal and insulate it. Two part expanding spray foam is installed on the rim joist and over the sill plate to seal all air leaks from the outside and insulate this important area of the home. Our spray foam has a high insulation value per inch of R7, and because it expands, it seals all cracks and gaps and joints where air from the outside enters the home. Results - warmer floors, less drafts, more comfortable rooms, the house is easier to heat and costs less to heat, less summertime condensation on cold basement surfaces.

 

Duct Encapsulation in South Windsor, CT

Insulating the ducts in an attic reduces the cost of heating and cooling a home.  Our team did a great job encapsulating the ducts for a homeowner in South Windsor, CT.  We helped this homeowner lower his costs and made his home more comfortable year round.

Insulating a Knee Wall in South Windsor, CT

We were contacted by the owner of this Cape Cod style home.  He wanted to save on his heating and cooling costs as well as make his home more comfortable year round.  Our team installed our Super Kneewall using our SilverGlo foam insulation board which is infused with graphite.  This knee wall is now properly insulated which will help lower the cost of keeping the home warm in the winter and cool in the summer.

Uninsulated Exterior Walls Dense Packed in South Windsor, Ct

Homeowner experienced problems with uninsulated exterior walls causing air leaks and drafts. Fogarty's Home Services dense packed treated, and insulated the exterior walls with TruSoft cellulose. This treated helped to make the house less drafty, warmer, quieter, more comfortable, less dust/pollen, house not so dry in the winter, lower fuel/electric bills, heating system runs less - less maintenance.  

Reducing Humidity in a Basement in South Windsor, CT

This homeowner called us out to their home in South Windsor, CT to take a look at some serious problems they were experiencing. The main reason they called Dr. Energy Saver by Eco Energy Solutions was because they were having issues with mold in their kitchen and basement. Due to some water damage over time there was mold under the kitchen sink, leaking down onto the rim joist in the basement. Humidity issues in the basement also took a part in that. When we got to the home we asked the homeowner about all of their concerns, for the entire home. The mold issue was their main concern, but they also were experiencing another problem. Their basement was always very uncomfortably humid. The rim joist is the perimeter of the floor framing system along the exterior of the house. The joints and gaps in the framing members allow for a great deal of air leakage in and out of the home. This can result in cold floors, high heating and cooling bills, as well as condensation in the basement and crawlspaces. When its hot and humid out, the homeowner was experiencing this poor air quality. This was due to outside air easily leaking into the home, making the basement an uncomfortable space. First we take care of the kitchen issues, and we can focus on the basement. Now, we know what we need to do to help this homeowner.

The first thing we need to do is spray our Mold-X treatment spray on the effected areas on the rim joist. We make sure we take care of all of the mold in the basement in order to be able to properly air seal with no reoccurring mold issues. After we have completed this step we are ready to air seal. We spray our two-part expanding SprayFoam  over the rim joist and end plates. This stops all air leaks from outside and insulates this important part of your home. Dr. Energy Savers SprayFoam has a high insulation value of R7. Since this foam expands after we spray, it seals up all of the gaps, cracks, and joints where air from the outside was easily entering the home. This finally corrected the basement mold and humidity problem. Thanks to Dr. Energy Saver by Eco Energy Solutions, this homeowner is now more comfortable, happy, and energy efficiently in their home no matter the season!!

Find A Contractor
Free Estimate
Top